Get a quote
Maxwave automatic CNC laser welding machine: white and navy cabinet with microscope welding head, CNC table, camera monitor and PC screen

Automatic and robotic welding

Automatic CNC Laser Welding Machine 200 / 300 / 500 W (Nd:YAG)

Models · MW-A200M · MW-A300M · MW-A500M

A pulsed Nd:YAG laser welder with a CNC 3-axis table and rotary axis for programmed, repeatable welds on flat and cylindrical parts. You set the weld path on the PC-based CNC2000 system and the machine welds automatically, with a microscope and camera monitor for alignment.

Laser power
200–500W
CNC table
350 × 350mm
Welding depth
0–3mm
Spot size
0.1–3mm
Get a quote Test my part on it
  • 2-year whole-machine warranty
  • Free operator training
  • Built to order: voltage, plug, labels
  • CNC 3-axis table, 350 × 350 mm, with rotary axis for round parts
  • Weld paths programmed on a PC with the CNC2000 system
  • Pulsed Nd:YAG source, 200, 300 or 500 W, pulse width up to 20 ms
  • Microscope on a 360° swivel and camera monitor for alignment
  • Motorized spot-size adjustment from 0.1 to 3 mm

Overview

This machine automates pulsed laser welding for parts that need the same weld again and again. You program the weld path on a PC with the CNC2000 system. The CNC table and rotary axis then move the part under the beam, and the machine welds without an operator guiding each spot.

The pulsed Nd:YAG laser heats a very small zone, so the part distorts little and the joint quality is high. That suits small precision parts, such as components for batteries, the automotive and aerospace industries, and jewelry. The table welds flat parts; the rotary axis turns cylinders for round seams.

Configuration

  • Laser: pulsed Nd:YAG with xenon flash lamp, 1064 nm, up to 20 ms pulse width and 50 Hz.
  • Pump cavity: ceramic reflector cavity that resists corrosion and heat; xenon lamp rated for more than 8 million pulses.
  • Motion: CNC 3-axis table, 350 × 350 mm, with rotary axis.
  • Control: PC with CNC2000 software, plus a touch panel on the cabinet.
  • Viewing: microscope on a 360° swivel with automatic eye-protection shading, and a camera monitor with crosshair.
  • Beam: motorized spot-size adjustment from 0.1 to 3 mm; 100 mm focal length.
  • Cooling: water chiller, 2700, 3500 or 6500 W capacity by model.

Typical applications

  • Precision components with repeated seams.
  • Battery parts.
  • Automotive and aerospace parts.
  • Round parts that need a full circumferential weld.
  • Jewelry and small metal parts in gold, silver, steel and titanium.

Options and customization

  • Laser power: 200, 300 or 500 W.
  • Supply: 220 V or 380 V, 50/60 Hz; plugs to suit your country.

The machine has a 2-year whole-machine warranty, and we train your programmers and operators free of charge at our factory in Wuhan.

Talk to an engineer

Tell us the material, thickness and the result you need. An engineer replies with a matched configuration and a quote.

Send your job details

Need a different setup?

This site shows only part of our range. Other powers and sizes, custom builds and everything around the machine are available on request.

Ask for the rest

Related guide

Choosing handheld welder power

Data

Specifications

Automatic CNC Laser Welding Machine 200 / 300 / 500 W (Nd:YAG) specifications
ModelsMW-A200M / MW-A300M / MW-A500M
Laser typeNd:YAG, pulsed, xenon flash lamp
Maximum laser power200 / 300 / 500 W
Rated output power180 / 270 / 460 W
Wavelength1064 nm
Pulse width≤ 20 ms
Pulse frequency≤ 50 Hz
Spot size range0.1–3 mm
Welding depth0–3 mm
Focal length100 mm
ControllerPC with CNC2000 automatic system
CNC table3-axis, 350 × 350 mm, with rotary axis
ViewingMicroscope, 360° swivel; camera monitor
Shielding gasArgon, 1 line
CoolingWater cooling
Chiller cooling capacity2700 / 3500 / 6500 W
Power supply220 V or 380 V ± 10%, 50/60 Hz (by model)
DimensionsMain unit 1250 × 580 × 1200 mm; chiller 700 × 500 × 900 mm

Values separated by / follow the models MW-A200M / MW-A300M / MW-A500M. Confirm table load and dimensions for your configuration with us.

Wuhan Maxwave Laser Technology Co., Ltd. · sales@zerolineai.com · +44 7762 362563 · Specifications may change; confirm your configuration with us.

Fit

Materials & uses

Materials

  • Stainless steel
  • Steel
  • Aluminium
  • Bronze
  • Titanium
  • Gold and silver

Applications

  • Precision components
  • Battery parts
  • Automotive parts
  • Aerospace components
  • Circumferential welds on cylindrical parts
  • Jewelry

FAQ

About this machine

How do I program a weld?

Set the weld path and parameters on the PC running the CNC2000 system. The table and rotary axis then move the part under the beam and the machine welds automatically.

Can it weld round parts?

Yes. The rotary axis turns cylindrical parts under the beam for circumferential welds. The table handles flat parts and straight seams.

What is the working area?

The CNC table is 350 × 350 mm. Confirm the maximum part weight for your configuration with us.

Can you test my part first?

Yes. Send us sample parts and we can test-weld them before you order, so you can judge the seam on your own part.

What power supply does it need?

220 V or 380 V ± 10%, 50/60 Hz, depending on the model. We can build for your local voltage and plug type.

Compare with

All laser welding machines